No need to frame out the hole, pet door comes with the aluminum tunnel.
Hale Pet Door Wall Model Pet Door is their most popular model. It's self-framing and self-supporting design makes it adaptable to fit into almost any opening cut into any interior or exterior wall - whether it is standard construction, stucco, block, or masonry walls.
These energy efficient doors stand up to all the elements. Whether the temperature outdoors is blistery hot or biting cold, Hale's quality design and construction gives greater protection from wind and unwanted critters.
Important Information: This pet door is not suitable for any size dog and is meant only for the smallest of cats. For the health and safety of any cat in excess of 8 lbs. we strongly recommend that you consider the next size up which has an additional 2" in height and an extra 1" in width. Please see Small Medium 6 1/2" x 9 1/2".
Passage opening:
- Small 5 1/2" wide x 7 1/2" tall
- Recommended for very small cats up to 8 lbs only
- Choose Double or Single Flap made of flexible 3/16" clear PVC vinyl:
- Double Flap (one flap on each wall surface) provides improved insulation and energy efficiency.
- Single Flap can be used in situations where insulation is not needed (i.e. installing in an interior door)
Features:
- Fits all walls 1/2" to 10" thick. (Special order to 16")
- CARPETED TUNNEL:
- Stain, mold and mildew resistant Olefin carpet
- Covers both inner walls and bottom of the tunnel
- EASY TO CLEAN
FRAME: Extruded heavy aluminum frame
- Inner Frame:
- Made of two separate metal extrusions
- Three sides entrap the security cover
- Both metals are .063" wall thickness
- Outer Frame:
- Extruded 6063-T5 aluminum with .063" wall thickness
- Designed to sleeve into the inside frame
SELF-FRAMING:
- No need to frame out the hole, pet door comes with the aluminum tunnel.
- Fits all walls 1/2" to 10" thick. (Special order to 16")
- Tunnel:
- Pre-assembled .040" aluminum wrapped around and riveted and sealed to the inner flange of the inside frame
- Attached to outer frame at install
- Flashing: Metal strip added to the bottom of tunnel to make sure that any water is shunted to the outside of the wall.
ENERGY EFFICIENT:
- Fully weather-stripped flaps (pile weather-stripping)
- Strong Alnico5 magnets: a 1/4" rod magnet 1 1/2" long made from an aluminum, nickel, and cobalt alloy known for its strength and durability.
- Strikes: Made of ferrous stainless steel. 1 1/2" long, 3/4" tall and 1/32" thick. U shaped with interior prongs, when squeezed onto the vinyl flap, the barbed prongs hold firmly.
- Optional double flap creates insulated pet door with dead air space between flaps.
- Weather stripping: Flap is surrounded by 1/2" nylon pile for maximum insulation. Nylon is woven into a backing 9/32" wide and 1/32" thick
AVAILABLE IN FOUR COLORS:
SECURITY:
- Security cover comes standard on the Wall Model as an interior top load version. On occasion there will be an obstruction above the pet door that prevents the security cover from being raised up far enough to remove. In those instances, we provide an optional side load model.
- Additional exterior security cover can be purchased separately.
- GE LEXAN polycarbonate security cover:
- 3/16" thick
- Comes in a dark gray tint
- Extremely shock and impact resistant
- Has a 3/8" diameter locking hole and a 3/4" diameter handle hole
- Dead Bolt Lock (Secures security panel into place).
LOCK:
- Secures security cover in place
- Pin Lock: 1/4" diameter positive action steel pin encased with 5/32" thick fabricated plated steel
- (Required drill bits are included)
RAINCAP:
- Comes standard with this wall mount unit
- Awning like attachment hooks on to the top edge of the outside frame
- Helps protect against water intrusion
- This option comes at no additional charge if ordered at the time of initial purchase and is not available on any other pet door on the market today
