Hale Pet Door Patio Panel for sliding glass doors:
- Customized panel insert fits perfectly in the tracks of your sliding door
- Super-simple, pressure-mount installation (no drilling, no screws)
- Insulated for increased energy-efficiency
- Made in the U.S.A.
Hale’s OMNI panel inserts fit inside the tracks of your sliding glass doors and come with the pet door already pre-installed. To guarantee a perfect fit, OMNI panel-inserts are custom-made to your specified measurements to match the height of your sliding doors.
OMNI Patio Panel Specifications:
Door Size |
Flap Size
Width x Height |
Overall Total
Panel Width |
Recommended Pet Size |
| Large |
11" x 16" |
14 7/8" |
Dogs 40 to 55 lbs
Shoulder height 15" to 20" |
| Large Tall |
11" x 19 1/2" |
14 7/8" |
Dogs up to 95 lbs
Shoulder height 21" to 24" |
| Large Tall Plus |
11" x 23 1/2" |
14 7/8" |
Dogs up to 110 lbs
Shoulder height 25" to 27" |
| Large Extra Tall |
11" x 27 1/2" |
14 7/8" |
Dogs up to 120 lbs
Shoulder height 24" to 31" |
STANDARD FEATURES:
- Glass: Double-pane, insulated tempered glass
- Double Flaps: Double flaps (one on exterior frame; one on interior frame) for improved insulation and energy-efficiency.
- Interior Security Cover with Pin Bolt Lock: 3/16" thick polycarbonate panel with 3/8" diameter locking hole; extremely shock and impact-resistant.
- OMNI Lock Bar: Fits behind sliding glass door to prevent sliders from opening.
- Weather stripping: Flap is surrounded by 1/2" black nylon pile for maximum insulation. In addition, black vinyl weather stripping is supplied (1 7/8" x 1/16") to attach to back edge of your patio door to prevent air leakage.
The OMNI Panel Insert (with pre-installed pet door)
- Hale's OMNI Patio Pet Door panel inserts are unquestionably the simplest to install and remove because they are pressure-mounted. You simply insert them into the same tracks as your sliders; there is no need to drill holes or screws into the doorframe.
- The OMNI panel insert is secured by means of a patented nut and bolt assembly that exerts pressure, making a very secure fit. The reason this works so well is because your OMNI panel insert will be custom made to your specific height measurements.
Please Note: Because OMNI panels are pressure-mounted, they are not recommended for sliding doors over 82" high. Hale will make them if you order them, but they are not recommended. Instead, see Hale's Standard line of patio pet doors.
- The easy-in/easy-out features of OMNI models are perfect for those who lease a home, apartment or condo because no drilling of holes is required and they are easy to remove.
- OMNI Patio Pet Door panel inserts are compatible with vinyl sliding glass doors such as Pella or Anderson.
The Pet Door (pre-installed at factory)
When you receive your OMNI panel insert, your pet door will already be installed in the frame of the panel. All you have to install is the panel itself.
The pet door in your OMNI panel insert comes standard with two flaps; one on the interior frame and one on the exterior frame. Both flaps are made from a flexible vinyl material that is especially durable and has shown (through extensive testing) to stand up over time to both extreme heat and cold.
The flaps close with a tight seal on three sides from imbedded magnets made out of an aluminum, nickel and cobalt alloy known for strength and durability.
The "rise" of the pre-installed pet door is at a height specified by you when you place your order. The "rise" is the amount of space equal to how high your pet must step up and over to go through the flap. Shorter pets should have a shorter rise, taller pets a taller rise.
IMPORTANT: Take note of where ground level is when your pet steps through the door. Is there a big drop waiting on the other side of the door for your pet? If so, you should get a shorter rise so the drop is not as far.
FRAME: Extruded heavy aluminum frame
ENERGY EFFICIENT:
- Fully weather-stripped flaps (pile weather-stripping)
- Strong Alnico magnets
- Double flap creates insulated pet door with dead air space between flaps.
SECURITY:
- Heavy-duty security cover is made of opaque, textured King Starboard
- Dead Bolt Lock (Secures security panel into place).
LOCK:
- Secures security cover in place
- Positive action - spring loaded heavy duty pin lock
AVAILABLE IN FOUR COLORS:
